FlPer¶

SCPI Commands

CONFigure:EVDO:SIGNaling<Instance>:RXQuality:LIMit:FLPer:MPER
CONFigure:EVDO:SIGNaling<Instance>:RXQuality:LIMit:FLPer:CLEVel

class FlPer[source]

FlPer commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

get_clevel() → float[source]

# SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:CLEVel
value: float = driver.configure.rxQuality.limit.flPer.get_clevel()

Defines the minimum confidence level for the forward / reverse link PER measurement.

return

min_confid_level: Range: 0 % to 100 %, Unit: %

get_mper() → float[source]

# SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:MPER
value: float = driver.configure.rxQuality.limit.flPer.get_mper()

Defines an upper limit for the measured forward / reverse link packet error ratio (PER) .

return

max_per: Range: 0 % to 100 %, Unit: %

set_clevel(min_confid_level: float) → None[source]

# SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:CLEVel
driver.configure.rxQuality.limit.flPer.set_clevel(min_confid_level = 1.0)

Defines the minimum confidence level for the forward / reverse link PER measurement.

param min_confid_level

Range: 0 % to 100 %, Unit: %

set_mper(max_per: float) → None[source]

# SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:MPER
driver.configure.rxQuality.limit.flPer.set_mper(max_per = 1.0)

Defines an upper limit for the measured forward / reverse link packet error ratio (PER) .

param max_per

Range: 0 % to 100 %, Unit: %