Handoff

SCPI Commands

CONFigure:EVDO:SIGNaling<Instance>:HANDoff:BCLass
CONFigure:EVDO:SIGNaling<Instance>:HANDoff:CHANnel
class Handoff[source]

Handoff commands group definition. 7 total commands, 2 Sub-groups, 2 group commands

get_bclass() → RsCmwEvdoSig.enums.BandClass[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:HANDoff:BCLass
value: enums.BandClass = driver.configure.handoff.get_bclass()

Selects a handoff destination band class/network; see ‘Band Classes’.

return

band_class: USC | KCEL | NAPC | TACS | JTAC | KPCS | N45T | IM2K | NA7C | B18M | NA9C | NA8S | PA4M | PA8M | IEXT | USPC | AWS | U25B | U25F | PS7C | LO7C | LBANd | SBANd USC: BC 0, US-Cellular KCEL: BC 0, Korean Cellular NAPC: BC 1, North American PCS TACS: BC 2, TACS Band JTAC: BC 3, JTACS Band KPCS: BC 4, Korean PCS N45T: BC 5, NMT-450 IM2K: BC 6, IMT-2000 NA7C: BC 7, Upper 700 MHz B18M: BC 8, 1800 MHz Band NA9C: BC 9, North American 900 MHz NA8S: BC 10, Secondary 800 MHz PA4M: BC 11, European 400 MHz PAMR PA8M: BC 12, 800 MHz PAMR IEXT: BC 13, IMT-2000 2.5 GHz Extension USPC: BC 14, US PCS 1900 MHz AWS: BC 15, AWS Band U25B: BC 16, US 2.5 GHz Band PS7C: BC 18, Public Safety Band 700 MHz LO7C: BC 19, Lower 700 MHz LBAN: BC 20, L-Band SBAN: BC 21, S-Band

get_channel() → int[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:HANDoff:CHANnel
value: int = driver.configure.handoff.get_channel()

Sets/gets the main RF channel (the only one for network releases 0/A) in the handoff destination cell.

return

channel: The reset value and the range of possible channels depend on the selected band class; for an overview see ‘Band Classes’. The values below are for band class BC0 (US Cellular) . Range: 1 to 799, 991 to 1323

set_bclass(band_class: RsCmwEvdoSig.enums.BandClass) → None[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:HANDoff:BCLass
driver.configure.handoff.set_bclass(band_class = enums.BandClass.AWS)

Selects a handoff destination band class/network; see ‘Band Classes’.

param band_class

USC | KCEL | NAPC | TACS | JTAC | KPCS | N45T | IM2K | NA7C | B18M | NA9C | NA8S | PA4M | PA8M | IEXT | USPC | AWS | U25B | U25F | PS7C | LO7C | LBANd | SBANd USC: BC 0, US-Cellular KCEL: BC 0, Korean Cellular NAPC: BC 1, North American PCS TACS: BC 2, TACS Band JTAC: BC 3, JTACS Band KPCS: BC 4, Korean PCS N45T: BC 5, NMT-450 IM2K: BC 6, IMT-2000 NA7C: BC 7, Upper 700 MHz B18M: BC 8, 1800 MHz Band NA9C: BC 9, North American 900 MHz NA8S: BC 10, Secondary 800 MHz PA4M: BC 11, European 400 MHz PAMR PA8M: BC 12, 800 MHz PAMR IEXT: BC 13, IMT-2000 2.5 GHz Extension USPC: BC 14, US PCS 1900 MHz AWS: BC 15, AWS Band U25B: BC 16, US 2.5 GHz Band PS7C: BC 18, Public Safety Band 700 MHz LO7C: BC 19, Lower 700 MHz LBAN: BC 20, L-Band SBAN: BC 21, S-Band

set_channel(channel: int) → None[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:HANDoff:CHANnel
driver.configure.handoff.set_channel(channel = 1)

Sets/gets the main RF channel (the only one for network releases 0/A) in the handoff destination cell.

param channel

The reset value and the range of possible channels depend on the selected band class; for an overview see ‘Band Classes’. The values below are for band class BC0 (US Cellular) . Range: 1 to 799, 991 to 1323

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.handoff.clone()

Subgroups