from .....Internal.Core import Core
from .....Internal.CommandsGroup import CommandsGroup
from .....Internal import Conversions
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class FlPer:
"""FlPer commands group definition. 2 total commands, 0 Sub-groups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("flPer", core, parent)
[docs] def get_mper(self) -> float:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:MPER \n
Snippet: value: float = driver.configure.rxQuality.limit.flPer.get_mper() \n
Defines an upper limit for the measured forward / reverse link packet error ratio (PER) . \n
:return: max_per: Range: 0 % to 100 %, Unit: %
"""
response = self._core.io.query_str('CONFigure:EVDO:SIGNaling<Instance>:RXQuality:LIMit:FLPer:MPER?')
return Conversions.str_to_float(response)
[docs] def set_mper(self, max_per: float) -> None:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:MPER \n
Snippet: driver.configure.rxQuality.limit.flPer.set_mper(max_per = 1.0) \n
Defines an upper limit for the measured forward / reverse link packet error ratio (PER) . \n
:param max_per: Range: 0 % to 100 %, Unit: %
"""
param = Conversions.decimal_value_to_str(max_per)
self._core.io.write(f'CONFigure:EVDO:SIGNaling<Instance>:RXQuality:LIMit:FLPer:MPER {param}')
[docs] def get_clevel(self) -> float:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:CLEVel \n
Snippet: value: float = driver.configure.rxQuality.limit.flPer.get_clevel() \n
Defines the minimum confidence level for the forward / reverse link PER measurement. \n
:return: min_confid_level: Range: 0 % to 100 %, Unit: %
"""
response = self._core.io.query_str('CONFigure:EVDO:SIGNaling<Instance>:RXQuality:LIMit:FLPer:CLEVel?')
return Conversions.str_to_float(response)
[docs] def set_clevel(self, min_confid_level: float) -> None:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:LIMit:FLPer:CLEVel \n
Snippet: driver.configure.rxQuality.limit.flPer.set_clevel(min_confid_level = 1.0) \n
Defines the minimum confidence level for the forward / reverse link PER measurement. \n
:param min_confid_level: Range: 0 % to 100 %, Unit: %
"""
param = Conversions.decimal_value_to_str(min_confid_level)
self._core.io.write(f'CONFigure:EVDO:SIGNaling<Instance>:RXQuality:LIMit:FLPer:CLEVel {param}')