from ....Internal.Core import Core
from ....Internal.CommandsGroup import CommandsGroup
from ....Internal import Conversions
from .... import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class FlPer:
"""FlPer commands group definition. 2 total commands, 0 Sub-groups, 2 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("flPer", core, parent)
[docs] def get_mtpsent(self) -> int:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:FLPer:MTPSent \n
Snippet: value: int = driver.configure.rxQuality.flPer.get_mtpsent() \n
Defines the length of a single shot forward link PER measurement, i.e. the maximum number of test packets sent. \n
:return: max_test_pack_sent: Range: 1 to 10000
"""
response = self._core.io.query_str('CONFigure:EVDO:SIGNaling<Instance>:RXQuality:FLPer:MTPSent?')
return Conversions.str_to_int(response)
[docs] def set_mtpsent(self, max_test_pack_sent: int) -> None:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:FLPer:MTPSent \n
Snippet: driver.configure.rxQuality.flPer.set_mtpsent(max_test_pack_sent = 1) \n
Defines the length of a single shot forward link PER measurement, i.e. the maximum number of test packets sent. \n
:param max_test_pack_sent: Range: 1 to 10000
"""
param = Conversions.decimal_value_to_str(max_test_pack_sent)
self._core.io.write(f'CONFigure:EVDO:SIGNaling<Instance>:RXQuality:FLPer:MTPSent {param}')
# noinspection PyTypeChecker
[docs] def get_scondition(self) -> enums.PerStopCondition:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:FLPer:SCONdition \n
Snippet: value: enums.PerStopCondition = driver.configure.rxQuality.flPer.get_scondition() \n
Qualifies whether the measurement is stopped after a failed limit check or continued. SLFail means that the measurement
is stopped and reaches the RDY state when one of the results exceeds the limits. \n
:return: stop_condition: NONE | ALEXceeded | MCLexceeded | MPERexceeded NONE: Continue measurement irrespective of the limit check ALEXceeded: Stop if any limit is exceeded MCLexceeded: Stop if minimum confidence level is exceeded MPERexceeded: Stop if max. PER is exceeded
"""
response = self._core.io.query_str('CONFigure:EVDO:SIGNaling<Instance>:RXQuality:FLPer:SCONdition?')
return Conversions.str_to_scalar_enum(response, enums.PerStopCondition)
[docs] def set_scondition(self, stop_condition: enums.PerStopCondition) -> None:
"""SCPI: CONFigure:EVDO:SIGNaling<instance>:RXQuality:FLPer:SCONdition \n
Snippet: driver.configure.rxQuality.flPer.set_scondition(stop_condition = enums.PerStopCondition.ALEXceeded) \n
Qualifies whether the measurement is stopped after a failed limit check or continued. SLFail means that the measurement
is stopped and reaches the RDY state when one of the results exceeds the limits. \n
:param stop_condition: NONE | ALEXceeded | MCLexceeded | MPERexceeded NONE: Continue measurement irrespective of the limit check ALEXceeded: Stop if any limit is exceeded MCLexceeded: Stop if minimum confidence level is exceeded MPERexceeded: Stop if max. PER is exceeded
"""
param = Conversions.enum_scalar_to_str(stop_condition, enums.PerStopCondition)
self._core.io.write(f'CONFigure:EVDO:SIGNaling<Instance>:RXQuality:FLPer:SCONdition {param}')