Drc¶
SCPI Commands
CONFigure:EVDO:SIGNaling<Instance>:LAYer:MAC:DFTProtocol:DRC:COVer
CONFigure:EVDO:SIGNaling<Instance>:LAYer:MAC:DFTProtocol:DRC:LENGth
CONFigure:EVDO:SIGNaling<Instance>:LAYer:MAC:DFTProtocol:DRC:CGAin
- class Drc[source]
Drc commands group definition. 3 total commands, 0 Sub-groups, 3 group commands
- get_cgain() → float[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:LAYer:MAC:DFTProtocol:DRC:CGAin value: float = driver.configure.layer.mac.dftProtocol.drc.get_cgain()
Defines the ratio of the power of the reverse data rate control channel to the power of the reverse pilot channel (for subtype 0/1 signals only) .
- return
drcc_gain: Range: -9 dB to 6 dB
- get_cover() → int[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:LAYer:MAC:DFTProtocol:DRC:COVer value: int = driver.configure.layer.mac.dftProtocol.drc.get_cover()
Specifies the DRC cover value that the AT is to use on its data rate control (DRC) channel (for subtype 0/1 signals only) .
- return
drc_cover: Range: 1 to 6
- get_length() → int[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:LAYer:MAC:DFTProtocol:DRC:LENGth value: int = driver.configure.layer.mac.dftProtocol.drc.get_length()
Defines the number of slots that the AT uses to send a single DRC (for subtype 0/1 signals only) .
- return
drc_length: Range: 1 slots to 8 slots
- set_cgain(drcc_gain: float) → None[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:LAYer:MAC:DFTProtocol:DRC:CGAin driver.configure.layer.mac.dftProtocol.drc.set_cgain(drcc_gain = 1.0)
Defines the ratio of the power of the reverse data rate control channel to the power of the reverse pilot channel (for subtype 0/1 signals only) .
- param drcc_gain
Range: -9 dB to 6 dB
- set_cover(drc_cover: int) → None[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:LAYer:MAC:DFTProtocol:DRC:COVer driver.configure.layer.mac.dftProtocol.drc.set_cover(drc_cover = 1)
Specifies the DRC cover value that the AT is to use on its data rate control (DRC) channel (for subtype 0/1 signals only) .
- param drc_cover
Range: 1 to 6
- set_length(drc_length: int) → None[source]
# SCPI: CONFigure:EVDO:SIGNaling<instance>:LAYer:MAC:DFTProtocol:DRC:LENGth driver.configure.layer.mac.dftProtocol.drc.set_length(drc_length = 1)
Defines the number of slots that the AT uses to send a single DRC (for subtype 0/1 signals only) .
- param drc_length
Range: 1 slots to 8 slots